Search:
   
Industrial Hose
 
Road & Rail Tanker Hose
Oil Suction & Discharge Hose
Chemical Hose
Carbon Free/Brewery Hose
Air , Pneumatic & Rockdrill Hose
Water Suction Hose
Cement Grouting Hose
Sand & Shot Blasting Hose
Phosphoric Acid Suction
Cable/Furnace Coolant Hose
  Chemical Resistance Chart
     
























































































































































































































































ROAD & RAIL TANKER HOSE
SPECIFICATION : IS 10733 Type IA/B & Type II A/B
 

 

CONSTRUCTION

Lining : Resistant to petroleum liquids.
Reinforcement : Cotton textile or synthetic material with  G. I. embedded
  wire.
Cover : Resistant to weather abrasion and petroleum products.
Electrical Continuity
: By providing anti-static copper wire.
End connections

: Normally flanged type  or  threaded  nipple  i .e.  built  in 
  type / vulcanize / crimped / swaged in hose.

Couplings

: As per BS 2464 or Lug type  or  Camlock  type.  Male or
 
female or both end male or female as per requirement of
  purchaser.

Application : Discharging of petrol and diesel  oil  from  tank  truck  &
  between tank, & trucks & trailers, suitable for  pressure,
  vacuum and self discharge . Very low deformation where
  used for petrol.
 
I .D . in mm

Working pr.
1A & 1B
kgf/cm2

Min . bend
radius
1A & 1B mm

Working pressure
2A & 2B kgf/cm2

Min . bend
radius
2A & 2B mm

32
3.5 130 7.0 190
38 3.5 150 7.0 230
50 3.5 200 7.0 310
63 3.5 260 7.0 380
76 3.5 310 7.0 460
100 3.5 410 7.0 560

Different types of construction in BS 3492
Type 1A :
Rough bore, light weight, maximum flexibility with internal and external wire reinforcement and corrugated outer cover.
Working pressure : 3.5 kgf/cm²
Bursting pressure : 14.0 kgf/cm²
Test pressure      : 3.5 kgf/cm²
Type 1B :
Smooth bore, light weight and maximum flexibility with wire reinforcement and smooth or corrugated outer cover.
Working pressure : 3.5 kgf/cm²
Bursting pressure : 14.0 kgf/cm²
Test pressure      : 3.5 kgf/cm²
 
Type 2A :  
Rough bore, medium weight, maximum flexibility with internal and external wire reinforcement and corrugated outer cover.
Working pressure : 7.0 kgf/ cm²
Bursting pressure : 28.0 kgf/cm²
Test pressure      : 7.0 kgf/ cm²
Type 2B :
smooth bore, medium weight and maximum flexibility with fully embedded wire reinforcement and smooth or corrupted outer cover.
Working pressure : 7.0 kgf/cm²
Bursting pressure : 28.0 kg/cm²
Test pressure      : 7.0 kgf/cm²

Vikram & Co. specialized in all types of hoses such as polypropylene, hydraulic, rubber hose, stainless steel hose, couplings, bellows, expansion joint, and pipe fittings in Mumbai India.
Profile | Products | Enquiry | Contact Us | Site Map
© 2005-2015 Vikram and Company. All Rights Reserved